Keysight x-series Getting Started Guide

X-Series EMI Receiver Getting Started Guide 13
Quick Start
Turning on the EMI Receiver the First Time
This window
appears and covers
the Launch window.
If you do not check the “Do not show this message again” check box, this message will be displayed
each time the instrument is turned on. No application will start while this message is displayed.
Before continuing, make sure that you carefully read the Anti-Virus message and determine what
action is appropriate.
4. Disable the Anti-Virus
message
— Select the check box and
click
Continue.
Messages similar to the following continue to appear:
Several required processes continue.
The application initializes.
5. When the installation
is complete, you
should see a display
like this:
6. Set user interface
language
a. On the instrument, press
System, User
Interface tab
.
b. Choose the desired
language from the
Language drop-down
menu.
Steps Actions Notes

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)