3
Tributaire™ Collection - Lecterns
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Fixed-Height Lectern
without Storage
base
assembly
Pneumatic-Adjustable Height
Lectern without Storage
base
assembly
Screw-Adjustable Height
Lectern without Storage
base
assembly
Fixed-Height Lectern
with Storage
base
assembly
Pneumatic-Adjustable Height
Lectern with Storage
base
assembly
Screw-Adjustable Height
Lectern with Storage
base
assembly
Tributaire Lecterns - Overview
Note: Six different Tributaire lectern
models are available. Each lectern
type comes with a specific base
assembly. Identify the parts and
hardware supplied, then reference the
illustrations on this page to confirm
the lectern unit(s) being assembled.
If assembling multiple lecterns, and
the correct base is not used for the
correct lectern, disassembly and
reassembly will be required.
To Next Page
Loading...
