Kia pride 1997 - Page 65

Recommended position
449
HEATING
1. Set the temperature control to the rec-
ommended position.
2. Set the air intake control to the es
position.
3. Set the airflow control to the ‘# posi-
tion.
NOTE
e If cooler air is desired at face level for
bi-level operation, set the airflow con-
trol to the ‘38 position.
e If the windshield fogs up easily, set
the airflow control to the position.
CLIMATE CONTROL SYSTEM .
4. Set the fan speed control to the rec-
ommended position.
NOTE
To warm up the interior quickly set the air
intake control to the ~€& position.
However, if the windshield becomes foggy
set the air intake control to the ey
position.
5. If dehumidified heating is desired, turn
on the air conditioner.
Recommended position
SIRIaoownnooSe— OFF
(Bgl sec —— =a 45
450
COOLING
1. Set the temperature control to the rec-
ommended position.
2. Set the air intake control to the ea,
position.
3. Start the engine. Turn on the air condi-
tioner(if equipped).
4. Set the airflow control to the #
tion.
posi-
NOTE
If warmer air is desired at floor level for bi-
level operation, set the air flow control to
the ws position and set the temperature
control to about mid position.
4-27