A-5 August 199976-100016-001
Intelligent Suppression Control/Fire Alarm System
PEGAsys
A-5 POWER SUPPLY/BATTERY CAPACITY.
The system is capable of charging batteries of various capacities up to 99 AH, refer to Table A-6 for details concerning battery
capacities and charging capabilities.
Table A-6. Battery Capacities
)sruoHpukcaB(yrettaB
ybdnatSelbaliavAmumixaM
spmAtnerruC
)ylppuSrewoPenOroF(
ybdnatSelbaliavAmumixaM
spmAtnerruC
)ylppuSrewoPowTroF(
)sruoh4(hA215.2
)sruoh4(hA716.3
)sruoh4(hA33A/N1.7
)sruoh42(hA332.1
)sruoh42(hA061ylppuSrewoP1rofdewollAtoN0.6
)sruoh42(hA669.0
)sruoh06(hA994.1
)sruoh06(hA999.0
)sruoh09(hA061ylppuSrewoP1rofdewollAtoN6.1
A-6 POWER REQUIREMENT EXAMPLE
The following power calculations will be based on a the system configuration listed below:
Central Control Panel (CCP) with: Field Devices:
- Central Control Module - Ten (10), Ionization Detectors
- Two (2), RX/TX Modules - Twenty (20), Photoelectric Detectors
- One (1), Power Supply Module - Ten (10), Heat Detectors
- One (1), Multi-Loop Motherboard - Six (6), Addressable Contact Input Devices
- Two (2), Signal Output Modules, with signal - Four (4), Addressable Contact Output Devices
appliances totaling .800A on each - One (1), Signaling Device, connected to MP1 of
- One (1), Output Relay Module the CCM
- One (1), Agent Release Output Module, has a
momentary control head on the releasing
circuit and signaling appliances totalling 0.5 A.
AC Branch Current Calculation Example: This example is based on the system specified in the previous paragraph. This system
current calculation is for a 120VAC main feed. Refer to Paragraph A-1 for additional information.
To Next Page
Loading...