Installation Instruction
Fix the display onto the handlebar and adjust to an
appropriate visual angle. Tighten all the connectors.
Normal Operation
Power On/Off
Hold Mode button for 2 seconds then the display will
power on, and the display will the power on the controller.
With display on, hold MODE to turn off power supply of the
e-bike. With the display off, the display and controller shut
down. The leakage current is less than 1 uA.
When parking e-bike for more than 10 minutes,
the display shut down automatically.
Display Interface
After starting up the display, default show is running
speed. Press MODE to change the indicated information in
sequence as below: Running Speed (Km/h) → Average
Speed (Km/h) → Max Speed (Km/h) → Trip Distance (km)
→ Total Distance (km) → Travel Time → Running Speed
(Km/h).
To Next Page
Loading...
Need help?
General
