Turn on/off Backlight
Hold UP 2 seconds to turn on the backlight of the
display, the headlight will be power on at the same time.
Hold UP for 2 seconds again, backlight turned off.
Turn On/Off Backlight
PAS Level Selection
Hold UP or DOWN to change the output power of the
motor. The power ranges from level 1 to level 5. Level 1 is
the minimum power. Level 5 is the maximum power. The
default value is level 1.
PAS Level
Battery Indicator
The 5 battery bars represent the capacity of the battery.
When the battery is in low voltage, battery frame will flash to
notice that the battery needs to be recharged immediately.
To Next Page
Loading...
