Throttle Definition
Throttle Enable/Disable
HL means throttle load, HL:N means function
disable ,HL:Y means function enable .
When HL=Y, throttle can control the function. Press
UP/DOWN to select Y, and press MODE to confirm the
selection, otherwise select N to turn to Throttle Vector
Enable Setting.
HL default value is N.
Throttle Enable/Disable Page
Throttle Level Enable/Disable
HND means throttle. HF：Y means throttle vector
enable , HF：N means throttle vector disable. When HF=Y,
turn throttle to change the running speed. Press UP/DOWN
to select Y or N, and hold MODE to confirm the selection
and quitting. Press MODE to confirm and turn to throttle
definition page.
To Next Page
Loading...
Need help?
General
