4. Turn the spring counterclockwise
to remove the bulb and replace it
with a new one.
5. Installation is carried out in reverse
order of removal.
(1) Spring
M46O741A
If using a bulb other than the
specied one, the lamp can be
damaged and the tractor can
even catch re.
Make sure to use bulbs with
the specied capacity.
WARNING
Make sure to use a genuine
bulb. Using a non-recommend-
ed bulb can cause a re.
The head lamps can temporar-
ily be fogged due to rain or
car wash. This is because of
the temperature difference be-
tween the inside and outside
of the lamp, which is normal.
CAUTION
M46O742A
TURN SIGNAL LAMP (REAR)
(1) Turn Signal Lamp
1. The turn signal lamp is installed on
the rear fender.
To Next Page
Loading...
