2. Unscrew the lens mounting bolt to
remove the lens.
(1) Bolt
(1) Turn Signal Lamp Bulb
3. With the bulb pressed downward,
turn it counterclockwise to remove
it. Replace it with a new one.
M46O743A M46O744A
Do not touch the bulb if it is
still illuminated or right after
it is turned "OFF". You can be
burned by the hot bulb.
For some bulbs which require
delicate handling or work pro-
cess, contact your local KIOTI
Dealer.
Do not touch the illuminating
glass part of the halogen bulb.
The bulb life can be shortened
by nger prints, dust and mois-
ture, or the bulb even can be
broken. Clean it with soft cloth.
The halogen bulb contains
compressed gas, so it can ex-
plode if dropping or scratching
it. Therefore, never use a bulb if
it is scratched or was dropped.
CAUTION
To Next Page
Loading...
