EasyManuals Logo

Kioti CS2610 User Manual

Kioti CS2610
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
1
-
14
CS2610
17. Tire mounting should be done by
qualified professionals; with the
proper equipment.
18. Maintaining correct tire pressure is
important for the life of your tires.
Do not inate the tires above the
recommended pressure specied
in the owner’s manual.
19. Secur ely support the tractor
when changing wheels or the
wheel tread width.
T66O128a
(1) Card Board (2) Hydraulic Line
(3) Magnifying Glass
20. Make sure that wheel bolts have
been tightened to the specified
torque.
21. Escaping hydraulic fluid under
pressure has sufficient force to
penetrate skin, causing serious
personal injury. Be sure to release
all residual pressure. Before dis-
connecting hydraulic lines.
Before adding pressure to the
hydraulic system, make sure that
all connections are tight and that
all lines, pipes and hoses are
free of damage.
T66O129a
22. FLUID ESCAPING FROM PIN-
HOLES MAY BE INVISIBLE. DO
NOT USE HANDS TO SEARCH
FOR SUSPECTED LEAKS;
Use a piece of cardboard or wood,
instead. Use of safety goggles
or other eye protection is also
highly recommended. If injured
by escaping uid, see a medical
doctor at once. This uid can pro-
duce gangrene and/or a severe
allergic reaction.
T66O130a
M46-EU,AU-01.indd 14 2012-03-09 오전 11:16:02

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kioti CS2610 and is the answer not in the manual?

Kioti CS2610 Specifications

General IconGeneral
Engine Power24.5 hp
Engine Type3-cylinder diesel
TransmissionHydrostatic
Drive4WD
GearsInfinite (2-range)
Front tire size18x8.5-10
PTO Speed540 RPM
Hydraulic System TypeOpen center
3-Point Hitch CategoryCategory 1
Fuel Capacity6.6 gal
Rear tire size26x12.0-12
Turning Radius8.2 feet

Related product manuals