KMT Streamline SL-IV User Manual

SECTION 1
INTRODUCTION
July 2003
1-1
05130661
Section 1 INTRODUCTION
1 SL-IV 11 kW (15 hp) Waterjet Pump General Information
The Streamline SL-IV 11 kW (15 hp) Waterjet Pump, maintains the level of
component reliability and ease of installation and maintenance that have made
the KMT Waterjet Streamline waterjet pumps the standard of the industry for
both water and Hydrobrasive™ applications.
The SL-IV 11 kW (15 hp) Waterjet Pump uses low pressure water, which meets
certain quality requirements, and increases the pressure up to 3,800 bar
(55,000 psi) for ultra-high–pressure waterjet cutting, hydrobrasive cutting,
cleaning, surface preparation, etc.
This manual provides information for installation, operation, and maintenance
of the KMT Waterjet SL-IV 11 kW (15 hp) Waterjet Pump.
1.1 Physical Description
The SL-IV waterjet pump is equipped with a hydraulic intensifier, a high
pressure attenuator, a motor/hydraulic pump assembly, an electric starter
panel, control sensors, solenoids and logic, control interface panel, and a low
pressure water filter.

KMT Streamline SL-IV Specifications

General

Brand	KMT
Model	Streamline SL-IV
Category	Water Pump
Language	English