3-6 A-61316 September 2004
Rotating images
To rotate the image on the screen:
• Turn the Image Rotation knob until the image is displayed at the
desired rotation. The greater the turning angle of the Image Rotation
knob, the faster the turning speed.
NOTE: If you hold down the Shift key and turn the Image Rotation knob,
the image quickly rotates by 90 degrees.
Auto skew correction
If Auto Skew Correction is turned on, the system automatically corrects
any skew of the image when printed. When auto skew is on, the indicator
is lit.
Correction
NOTE: This function supports angle rotations of up to 30 degrees.
Selecting the film type
You can choose Auto, Negative or Positive film type.
Auto: automatically determines the polarity of the film being
used.
NOTES:
• The system cannot determine the polarity of certain types
of film. If this happens, select the film type manually.
• The system does not detect exterior conditions such as
when the glass surface of the carrier is dirty or scratched.
Nega: select Nega when using negative film. Dark and light
values of the print will be reversed.
Posi: select Posi when using positive film. Dark and light
values of the print will be consistent with the image on film.
To select a film type:
• Press the Film Type key. Each time you press the key it will rotate
between the Auto, Nega and Posi selections.
Film Type
Auto
Nega
Posi
To Next Page
Loading...
