Kodak 2400DSV-E - Manual Exposure and Print Quantities

3-8 A-61316 September 2004
Using Manual exposure
1. Press the Auto key to select the Manual Exposure mode. The Auto
Exposure indicator will not be illuminated when Manual Exposure is
selected.
Darker
Auto
Lighter
2. Press the Darker or Lighter key to set the desired image density or
exposure level.
NOTE: When the Darker and Lighter keys are pressed at the same
time, the exposure level returns to the center.
Setting print quantities
The Multi-Print key on the Control Panel allows you to set the number of
prints you want to make. This function is only available when using the
Printer mode. 19 is the maximum number of prints that can be entered.
To set the number of prints:
• Press the Multi-Print key until the number of prints you want to make
appears in the display.
NOTE: To reset the number displayed, press the Clear/Stop key. The
display will be reset to 1.