Kodak 2400DSV-E - Maintenance Procedures; Cleaning the Scanner Components

A-61316 September 2004 5-1
5 Maintenance
This chapter provides maintenance procedures for:
• Cleaning the scanner
• Replacing the projection lamp
Cleaning the scanner
The scanner should be cleaned daily for optimal operating conditions.
Screen
• With a damp cloth, clean and remove any dust or debris from the
surface of the screen.
IMPORTANT: Never use alcohol or any other solvent when cleaning
to avoid causing damage to the screen or erasing the
frame size markers.
Outer Covers
• Dust the exterior panels of the scanner with a soft, dry cloth.