A-61316 September 2004 6-5
Clearing misfeeds from
inside the printer
Following are procedures for clearing a misfeed from the inside of the
printer.
1. Open the upper unit by pulling the upper unit lock release lever
forward.
NOTE: Push the print tray in before opening the upper unit.
2. Remove the imaging cartridge.
NOTE: Be sure to cover the imaging cartridge with a heavy cloth to
protect it from light when it is removed from the printer.
3. If the misfeed occurred before the sheet of paper entered the fusing
unit, gently pull the misfed sheet up and out as shown.
To Next Page
Loading...
