Kodak 2400DSV-E - Call Tech. Rep. Codes and Misfeed Clearing (Feeding Tray)

6-2 A-61316 September 2004
Call Tech. Rep. Procedure — if one of the following codes is displayed, a malfunction has occurred
in the system. After turning the power off and unplugging the power cord, contact your Kodak Service
Representative.
Location Code Description
C1 Optical path switching failure.
C2 A scanning malfunction.
Scanner
C4 A Fan Motor malfunction.
C6 A Fusing malfunction.
C7 A Laser malfunction.
C8 A Polygon Motor malfunction.
C9 A Main Drive Motor malfunction.
Printer
CA A Fan Motor malfunction.
C6 A Communication malfunction (Printer). Scanner
Printer
CL A Printer Clock malfunction.
Scanner PC CC A Communication malfunction (PC)
Clearing misfeeds from
the paper feeding tray
Following are procedures for clearing a misfeed from the paper feeding
tray. Use these procedures if the P1, P2 or P3 code is displayed.
CAUTION: The fusing unit inside the printer becomes very hot
during operation. To avoid a burn, be very careful not to
touch the fusing unit until it is cool.
1. Open the upper unit by pulling the upper unit lock release lever
forward.
NOTE: Push the print tray in before opening the upper unit.