EasyManua.ls Logo

Kodak 2400DSV-E - Installation and Environmental Requirements

Kodak 2400DSV-E
73 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-2 A-61316 September 2004
Product description
The Kodak 2400DSV-E Digital Scanner-Printer scans images and outputs
to a printer or through the PC interface. All controls are mounted on the
front panel for ease of operation. You can scan directly to the optional
laser printer or to a PC at up to 800 dpi.
Installation
Placement of the scanner in the environment described below ensures
optimal performance.
A well ventilated place, which is free from ammonia or other organic
gases.
The wall socket must be easily accessible so that the plug of the power
cord can be disconnected at any time.
An area free from direct sunlight.
A place which has easy access to a power outlet so the unit may be
easily plugged in and unplugged.
A place, which is out of the direct air stream of an air conditioner, heater
or ventilator and is not subject to extremely high or low temperatures or
humidity.
A stable location with a flat surface that is not subject to vibration.
A place that is free from any object that would block the heat exhaust
duct of the printer.
A place away from curtains or anything else that is easily flammable.
An area that is safe from spilled water or other liquids.
A dust-free location.
NOTE: If the scanner is to be located near a window, do not face the
screen towards the window.

Table of Contents

Related product manuals