A-61635 December 2010 2-5
Terminology Before you begin a basic understanding of some of the terminology used in
Kodak Capture Pro Software is helpful.
Kodak Capture Pro Software is “job” based. A job is a configuration that is
setup to capture and process a set of documents that you want to scan.
To scan documents in a job, you need to create a batch to hold the scanned
documents, images and data before you output them.
Kodak Capture Pro Software organizes scanned documents in the following
hierarchy:
• Batch: contains one or more scanned documents (similar to a folder or
hanging file containing several separate documents).
• Document: contains one or more page(s) related to a single item (e.g., the
contents of an envelope).
• Page: are physical sheets of paper that are fed through the scanner to
produce images.
• Image: electronic representations of scanned pages.
Output is the process of sending the batch to the desired output system /
location in the format that you chose.
NOTE: See Appendix A, Glossary for a full listing Kodak Capture Pro Software
terminology.
To Next Page
Loading...