2-8 A-61635 December 2010
Opening an existing
batch
To open an existing batch:
1. Select Batch>Open. The Batch Manager dialog box will be displayed.
Depending on your settings, the batches from all of your job setups will be
displayed.
2. Highlight the batch you want and click Open. The batch you selected will
be displayed in the Image Viewer and the Batch Explorer. You can now
work in this batch.
NOTE: If you are scanning in a multiple-scanner environment and the
batch you selected is already opened at another workstation,
Kodak Capture Pro Software will not allow you to open the batch.
The message, The batch cannot be opened because it is
currently in use by another user will be displayed.
Deleting a batch Deleting a batch erases both the images and batch subdirectory structure of
the selected batch.
1. Select Batch>Open. The Batch Manager dialog box will be displayed.
Depending on your settings, the batches from all of your job setups will be
displayed.
2. Highlight the batch you want to delete and click Delete. The message, Are
you sure you want to delete the selected batch “XXXXX”? will be
displayed.
3. Click OK.
To Next Page
Loading...