6-30 A-61635 December 2010
Editing OCR zone
properties
To edit or change an existing OCR zone:
1. Select File>Job Setup. The Job Setup dialog box will be displayed.
2. Select a job name from the Job Name drop-down list and open the Capture
tab.
3. Select Separation>By OCR Zones. The OCR window will be displayed.
4. Click on the OCR zone that you want to change, or click on the OCR zone
name in the list on the left side of the OCR window.
5. Right-click the mouse button to display the context-sensitive menu and
click Zone Properties. The OCR Zone Setup dialog box will be displayed.
6. After you change your settings, click OK to close the dialog box and return
to the OCR window.
7. Click OK to save your settings and exit the Job Setup dialog box.
After editing an OCR zone, test the OCR zone to verify that it is still readable.
Deleting an OCR
zone
To delete an existing OCR zone:
1. Select File>Job Setup. The Job Setup dialog box will be displayed.
2. Select a job setup from the Job Name drop-down list and open the Capture
tab.
3. Select Separation>By OCR Zones. The OCR window will be displayed.
4. Click on the OCR zone that you want to delete. You can also click on the
OCR zone name in the list on the left side of the OCR window. The zone is
highlighted.
5. Click Delete.
6. Click OK.
Transferring an
image to the OCR
window
You can scan an image containing text for OCR directly into the Image Viewer
and then transfer it to the OCR window to create an OCR zone.
1. Scan your image containing the OCR text.
2. Locate the image in the Image Viewer and right-click on it.
3. Select Copy image to job setup. The Copy Image to Job Setup dialog
box will be displayed.
4. Enter the new image name in the Save image as field.
5. Click OK.
To Next Page
Loading...