4-20 A-61635 December 2010
Adding a batch index
field
To add a batch index field:
1. Select File>Job Setup. The Job Setup dialog box will be displayed.
2. Select a job from the Job Name drop-down list and open the Index tab.
3. Open the Batch tab.
4. Click Add. The Batch Add Index Field dialog box will be displayed.
5. Complete the information in the dialog box and click OK. See the section
entitled, “Adding a document index field” earlier in this chapter for detailed
field descriptions.
6. Click OK to save and exit the Job Setup dialog box.
To Next Page
Loading...