A-61635 December 2010 3-15
Toolbars
Capture toolbar The Capture toolbar contains the following commands:
Batch toolbar The Batch toolbar contains the following commands:
Document toolbar The Document toolbar contains the following commands:
Start — starts scanning images on the scanner.
Stop Scan — stops scanning images.
Page Setup name — select a page setup name from the drop-down list that
best fits the job you are scanning.
Page Setup — displays the Page Setup dialog box, which
allows you to set up scanning parameters.
Sides to Capture — allows you to select Two-sided, One-
Sided Front or One-Sided Back.
New batch — displays the New Batch dialog box, which allows
you to create a new batch.
Open batch — displays the Batch Manager dialog box, which
allows you to open an existing batch.
Output batch — starts outputting all the images in the current
batch.
New document — allows you to add a new document.
Insert Pages — inserts additional pages into a scanned
document. Highlight the first image in a page and the icon
becomes active. Put the additional pages in the scanner and
click this icon.
Rescan pages — repeats scanning of selected parts of the
document. Highlight the page or pages you want rescanned, put
the originals in the scanner and click this icon.
To Next Page
Loading...