4-58 A-61635 December 2010
Selecting JPEG or JEPG2000 as your file format (if your output type is
Color/Grayscale):
If you select JPEG2000 as your file format to process your output, the
JPEG2000 Setup dialog box will be displayed.
1. Select Good, Better or Best color quality.
NOTE: If you select JPEG as your file format, the additional color quality
options are available: Same as scanned, Draft and Superior.
Same as scanned is recommended.
2. When finished, click OK.
Selecting Text as your file format:
If you select Text as your file format to process your output, the Text Setup
dialog will be displayed.
1. Select either Single Page or Multi-Page as the way to group your image
files in output. Every input (scanned) image file will be a separate output
file
• If you select Single-Page, every image you scan is a separate image
file in output. Therefore, if you scan a page, you will have two separate
image files in output (one for the front and one for the back). If you are
scanning dual stream, you will have four image files in output.
To Next Page
Loading...