4-66 A-61635 December 2010
4. If you checked Add Leading zeros, use the Number Length box to
indicate the number of digits (including any leading zeros) for the sequence
number.
5. If you add <Image-side label> to the Filename Formula field, the Front
Color/Grayscale, Front Black & White, Back Color/Grayscale, or Back
Black & White text boxes become active. If desired, enter text labels in
these fields.
6. The Duplicate file handling area provides two options. Select one of
these options:
• Report an error and abort the output processing: generates an error
message and stops outputting the batch.
• Add a sequence number to the name: appends a sequence number
(e.g., -001, -002) and continues outputting the batch.
7. If you select Page Sequence Number or Image Sequence Number the
Reset Feature is available. Set the sequence numbering behavior for
page and/or image numbers.
• Start at 1 for every batch (available only with Page Sequence Number
and Image Sequence Number).
• Start at 1 for every document (available only with Image Sequence
Number).
• Continuous image numbering from (available only with Image
Sequence Number).
8. Click OK to save your output formula.
NOTE: Multi-page Formulas: if you selected multi-page output for TIFF, PDF
or Searchable PDF, you cannot add a Page Sequence Number,
Image Sequence Number or Image-side label into the Location
formula or File name formula. Similarly, if you choose multi-page
output at the batch level, you cannot name the output file with any
more detailed information than batch-level information.
To Next Page
Loading...