4-74 A-61635 December 2010
• Image content (%) is Below — this option is similar to the Image size
(byte) Below option except that you enter a percentage value that Capture
Pro Software will consider the image to be blank or too little content. Any
image that is less than this value will be considered blank and will be
deleted. Use this setting when there are blank pages.
NOTES:
• When selecting the Image size (byte) option, other factors such as
resolution, compression, etc., will impact the image size.
•The Image content (%) option only looks at the percentage of information
on the image and therefore, is a more consistent and dependable option to
use when images may vary in size, resolution, compression, etc.
Never — click Never, if you do not want to delete any images.
Auto-orientation This option analyzes the content of your documents and orients each
document so it is right-reading.
Auto orientation does not work with all character sets. It is recommended that
you scan some test documents to ensure the document will be oriented
correctly.
• You can select Enable auto-orientation on front or Enable auto-
orientation on back.
NOTE: Auto-orientation will be performed during the output creation
process.
To Next Page
Loading...