A-61635 December 2010 4-91
Message Configuration— displays the Message Configuration dialog box for
your scanner. This dialog box allows you to specify custom text to be included
in your print string. A maximum of 20 characters is allowed. You can have up to
six unique messages per string.
Print string — enter a print string or click Setup to open the Formula
Configuration dialog box and set up your print string using predefined values.
New batch starts with counter equal to — enter the number you want to
start a new batch with.
Kodak i200 and i100
Series Scanners
This section provides information that is specific to Kodak i200 Series
Scanners and Kodak i100 Series Scanners.
The Imprinter tab provides the following options.
Enable imprinter — check this box to enable the imprinting function.
NOTE: The Counter is the document count for the scan session. This value is
incremented sequentially by the scanner and returned in the image
header.
Counter length — allows you to configure the length of the counter from 1 - 9.
However, if for example, you only have six characters left in the print string,
then the length would be limited to 6.
Counter format — allows you to configure the format of the counter when the
width of the value is less than the field width. Select one of the following
formats from the drop-down list:
• Display leading zeros (e.g., “004)
• Suppress leading zeros (e.g., “ 4”)
• Compress leading zeros (e.g., (“4”)
Date Delimiter — select a separator setting from the drop-down list: None,
Forward slash (2006/08/24), Hyphen (2006-08-24), Period (2006.08.24), or
Space (2006 08 24).
To Next Page
Loading...