4-94 A-61635 December 2010
Date Delimiter — select a separator setting from the drop-down list: None,
Slash (2008/08/24), Hyphen (2008-08-24), Period (2008.08.24), or Space
(2008 08 24).
Position — select a value from 0.35 to 33.5 inches to determine how far the
printed information will appear from the leading edge of the document.
• Printing automatically stops 6.3 mm (1/4-inch) from the trailing edge of the
document even if the information has not been completely printed.
• The horizontal print position is set manually on the scanner. See the User’s
Guide for information on changing the horizontal print position.
Counter length — allows you to configure the length of the counter from 1 - 9.
However, if for example, you only have six characters left in the print string,
then the length would be limited to 6.
Date format — select one of the following formats: MMDDYYYY, DDMMYYYY
or YYYYMMDD.
Print string — allows you to define your print string. The maximum amount of
characters for the print string is 40 characters (including spaces).
Select the level of the document that you want the specified print string to be
printed on: Level 1, Level 2 or Level 3. For example, if you use three level
image addressing, you can print the date on your level 3 document, nothing on
level 2 and document count on level 1.
Message Configuration — displays the Message Configuration dialog box for
your scanner. This dialog box allows you to specify custom text to be included
in your print string. A maximum of 20 characters is allowed. You can have up to
six unique messages per messages.
Use uniform print string — click this if you want the print string to be the
same on all levels.
NOTE: For information on the Image Address Options see the next section
entitled, “Image Address tab”.
To Next Page
Loading...