7-10 A-61635 December 2010
Image Retention Options
• Keep all images — by default, only the flagged color or grayscale images
will remain in the batch with the black and white images and only these
images may be modified post scan. Select this box if you want to keep all
the color or grayscale images so that you can modify any image sent from
the scanner, whether they are flagged or not.
NOTES:
• When using a Kodak Scanner with Thresholding - Intelligent QC enabled,
the grayscale image will only be available for those images identified by
the scanner as containing excessive noise.
• Selecting Keep all images will not result in auto deleted images being
kept.
• If you do not want to keep the color or grayscale images after output, then
only select the Black and White checkbox on the Output tab of Job
Setup.
Hole fill Hole fill will fill round or rectangular holes found near the edge of the page.
The scanner background must be black. You can select Fill Front, which fills
holes found on the front side of a page, or Fill Back, which fills holes found on
the back side of a page
To Next Page
Loading...