A-61635 December 2010 B-1
Appendix B System Requirements
Contents Recommended software and hardware.....................................................B-1
Certified operating systems .......................................................................B-1
Certified scanners ......................................................................................B-1
For a successful installation of Kodak Capture Pro Software, review the
following to be sure your system is equipped with the minimum software and
hardware requirements.
Recommended software
and hardware
Minimum hardware requirements:
• 2.8 GHz processor with at least 1 GB of memory
NOTE: If you are producing Searchable PDF output on the same PC while
scanning into new batches, it is recommended that your PC has a
dual-core processor.
To ensure optimal performance, the following is recommended:
• Dual core processor
• Memory: 4 GB or higher
• Hard disk: at least 40 GB (7200 rpm)
• Monitor resolution: Minimum 1024 x 768
•DVD-ROM drive
NOTE: Depending on your scanning resolution and feature set, there may be
some modes that do not drive your scanner at full rated speed using
the minimum system hardware requirements. It is recommended that
you increase your CPU speed and system memory.
Certified operating
systems
Kodak Capture Pro Software is certified on the following Microsoft Windows
operating systems:
• Windows XP Professional, SP2 (32-bit and 64-bit)
• Windows Vista (32-bit and 64-bit)
• Windows 7 (32-bit and 64-bit)
To use Kodak Capture Pro Software with Windows Vista or Windows 7, your
scanner must have a Windows Vista or Windows 7certified driver. Check with
the manufacturer to confirm that your scanner will work with Windows Vista or
Windows 7 certified driver.
Certified scanners Kodak Capture Pro Software is certified with more than 150 scanners from a
wide range of manufacturers. For a full list of the scanners currently supported
go to www.kodak.com/go/kcsscannersupport
.
To Next Page
Loading...