F-8 A-61635 December 2010
3. Click Kodak SS550 Decryptor. The KODAK Scan Station Encryption Tool
dialog box will be displayed.
4. Encrypt the .reg file by selecting the Encrypt and File options in the
Encryption tool.
5. Select the KCProxy.reg by clicking Select Source.
6. Select an output directory by clicking Select Output Directory.
7. Click Process to create KCProxy.dat.
8. Copy KCProxy.dat to the USB drive.
9. Log into the Scan Station Pro 550 in Service mode as previously described
in “Exporting job setups”.
10. Insert the USB drive into the Scan Station 550.
11. Click Proxy on the Scan Station Service Mode screen.
12. Click Reboot. When finished, remove the USB drive. The Startlist dialog
box will be displayed.
13. Select KODAK Scan Station Pro 550 and click Reboot. The Scan Station
550 will reboot with Kodak Capture Pro Software.
To Next Page
Loading...