Kodak 8383697 - Capture Pro Software - Page 73

A-61635 December 2010 4-25
#[min, max) — used to specify a value that is greater than or equal to min
and less than max.
Examples
n[-100, 100)
Description — any number greater than or equal to –100 and less than 100
Valid input examples
-100
-99.9
99.9999
Invalid input examples
-100.1 too small, must be greater than –100
100 too large, must be less than 100
#[min, max] — used to specify a value that is greater than or equal to min
and less than or equal to max.
Examples
n[-100, 100]
Description — any integer number greater than or equal to –100 and less
than or equal to 100
Valid input examples
-100
0
100
Invalid input examples
-100.1 too small, must be greater or equal to –100
100.001 too large, must be less than or equal to 100
i[100, *)
Description — any integer number greater than or equal to 100
Valid input examples
100
1000
Invalid input examples
99 too small, must be greater than or equal to 100
100.5 integer values cannot have a decimal point
i(-1.0, +1.0)
Description — this is an invalid input format because the min and max are not
integer values as the “i” specifies.
n(+1.0, -1.0)
Description — this is an invalid input format because max is less than min.