A-61635 December 2010 4-35
Transform number
formats
#<width, fracwidth>
#<width, fracwidth, padding>
#<textformats, width, fracwidth>
#<textformats, width, fracwidth, padding>
0width
# can be one of the following characters to define the desired number type.
n: generic number
N: generic number with sign
p: percentage number
P: percentage number with sign
c: currency number
C: currency number with sign
The value range or precision of the number is limited by the operating system.
The valid number range is 1.7E ±308 (15 digits).
#<width, fracwidth> — used to format a number that has at most, width
number of characters and at most, fracwidth characters after the decimal.
width defines the total number of digits to be included in the output string.
• If width is a positive number, the output text will be right-aligned with the
padding character (if any) on the left.
• If width is a negative number, the output text will be left-aligned with the
padding character (if any) on the right.
fracwidth defines the number of digits to be displayed to the right of the
decimal point.
The number 0 is used to show no decimal point.
The * character is used to show a default of 6 digits to the right of the decimal
point.
Examples
n<20,2>
Description — a generic number with a maximum width of 20 characters and 2
digits after the decimal point. The string will be right aligned.
To Next Page
Loading...