To Next PageTo Next PageWhat to do if menu, flash, share, delete, review, 4-way, or OK buttons do not operate correctly on Kodak EasyShare C643 Digital Camera?
If one or more buttons (menu, flash, share, delete, review, 4-way, or OK) on your Kodak Digital Camera are not operating correctly, check for damage to the buttons and inside the back cover AY. If there's damage, install a new back cover AY or a new MCU board/lens AY.
Why my Kodak EasyShare C643 does not turn on?
If your Kodak Digital Camera is not turning on, you should first check the power source and the fuses F1 and F2 on the power board. If the fuses are open, replace them. Also, check the board-to-board connector JP1 on the MCU board/lens AY to J3 on the power board. Then, diagnose the module with the malfunction by disconnecting all modules from the mode dial board and connecting them one at a time until the fuse opens. If needed, install a new mode dial board, power board, or MCU board/lens AY.
Why ready light does not turn on and Kodak EasyShare C643 Digital Camera does not work?
If the ready light doesn't turn on and the camera doesn't work, turn on the camera, install new batteries or charge rechargeable batteries, or turn the camera off and then back on.
How to fix a picture that is too light on Kodak Digital Camera?
If your picture is too light, make sure there is at least 24 in. (0.6 m) between the camera and the subject. You can also decrease Exposure Compensation.
How to make picture clearer on Kodak EasyShare C643 Digital Camera?
To improve picture clarity on your Kodak Digital Camera, try cleaning the lens. Ensure there's at least 24 inches (0.6 m) between the camera and the subject. Also, place the camera on a flat, steady surface or use a tripod.
How to fix a picture that is too dark on Kodak Digital Camera?
If your picture is too dark, try the following: Turn on the flash. Also, ensure that the subject is no more than 7.9 ft (2.4 m) away from the camera. Use Fill flash or adjust your position so that light is not behind the subject. Finally, increase Exposure Compensation.
How to fix the image if it is not in focus on Kodak EasyShare C643 Digital Camera's monitor LCD?
If the image on the monitor LCD of your Kodak Digital Camera is not in focus, you should install a new monitor LCD.
Why my Kodak EasyShare C643 Digital Camera does not download images from the USB port?
If your Kodak Digital Camera is not downloading images from the USB port, first connect the camera to the computer to check for communication. Then, check for any damage to the USB connector pins on J3 on the MCU board and the board-to-board connector J1 on the MCU board/lens AY to J3 on the power board. If necessary, install a new MCU board/lens AY.
Why my Kodak EasyShare C643 Digital Camera does not recognize the memory card?
If your Kodak Digital Camera does not recognize the memory card, try using a new one. Check that the “IMAGE STORAGE” option is set to “AUTO” and ensure the socket of the memory card on the MCU board/lens AY is not damaged.
What to do if images are not stored on the memory card of Kodak EasyShare C643?
If images are not being stored on the memory card of your Kodak Digital Camera, try using a new memory card. Check that the write protect switch on the SD card is not enabled and that the “IMAGE STORAGE” option is set to “AUTO”. Ensure the socket of the memory card on the MCU board/lens AY is not damaged. You can also format the memory card and try capturing an image again.
General| Brand | Kodak |
|---|---|
| Model | EasyShare C643 |
| Category | Digital Camera |
| Language | English |
