76
Chapter 10
SD/MMC Cards and Internal Memory
Problem Cause Solution
The camera does
not recognize
your SD/MMC
card.
Card may not be
SD/MMC certified.
Purchase a certified SD/MMC
card (page 10).
Card may be corrupt. Reformat the card (page 53).
Caution: Formatting erases all
pictures and videos, including
protected files.
No card is inserted in
camera or card is not
fully inserted.
Insert a card into the card slot,
then push to seat the connector
(page 10).
Camera freezes up
when a card is
inserted or
removed.
Camera detects an
error when the card
was inserted or
removed.
Turn the Mode dial off, then back
on.
Make sure the camera is off when
inserting or removing a card.
Memory card full. Storage is full. Transfer pictures and videos to
the computer, then delete them
from the camera.
The maximum
number of files or
folders is reached (or
other directory
concern).
Transfer pictures and videos to
the computer, then format the
card or internal memory
(page 53).
Caution: Formatting a card erases
all pictures and videos, including
protected files. (Formatting
internal memory also erases
email addresses. To restore
addresses, see Kodak EasyShare
software Help.)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
