4
31
Using the Self-Timer
When you set the Self-Timer and press the Shutter button, the mc3 device waits
10 seconds before taking the picture. This lets you get into the picture!
1 Move the Mode selector to the Pictures
position. Press the Menu button.
The LCD displays the Picture menu.
2 Press the buttons to highlight the
Self-Timer icon. Then press the Select
button.
3 Press the buttons to highlight ON,
then press the Select button.
The new Self-Timer setting is shown next
to the Self-Timer icon.
4 Press the Menu button.
The Self-Timer icon appears at the top of
the LCD.
5 Place the device on a tripod or firm
support. Compose the picture using the
LCD. Press the Shutter button all the way
down, and then move into the picture.
The Self-Timer icon blinks until the
picture is taken. If sounds are turned on,
the device also “beeps” during this time.
DC80 Digital Camera
ICES-003 class B
Made in Taiwan
N137
VIDEO
OUT
3-AAA BATT.
Tripod Mount
MediaCam.book Page 31 Wednesday, March 7, 2001 8:48 AM
To Next Page
Loading...
Need help?
General
