Kodak mc3 - Getting Started with the KODAK mc3; Initial Device Setup Procedures

1
1
1 Getting Started
Preparing to Use the mc3 Device
Before using the KODAK mc3 Portable Multimedia Device, you need to:
m Attach the wrist strap.
m Load the batteries.
m Insert a KODAK Picture Card.
Attaching the Wrist Strap
Attach the wrist strap to carry the mc3 device.
1 Thread the short loop of the wrist strap
through the recessed post.
2 Thread the long end of the wrist strap
through the short loop. Pull until secure.
MediaCam.book Page 1 Wednesday, March 7, 2001 8:48 AM