5-8 A-61796 September 2014
Advanced Settings
• Hole Fill: allows you to fill in the holes that are around the edges of
your document. The types of holes that are filled include: round,
rectangular, and irregularly shaped (e.g., double-punched or those
having a slight tear that could have occurred when the document was
removed from a binder).
• Blank Image Detection: used to detect blank pages (e.g., the back
side of a document), so these pages can be discarded. If you select
this option, you can select Based on Document Content where you
can select a percentage where document images that fall below the
selected percentage will be discarded.
• Image Edge Fill: fills the edges of the final electronic image by
covering the area with the selected color.
-None
- Automatic: the scanner will automatically fill the edges of the
image using the surrounding color.
- Automatic - include tears: in addition to filling the edges, the
Scan Station will also fill in tears along the edge of document.
- White: allows you to enter values for the Top, Bottom, Left and
Right margins.
- Black: allows you to enter values for the Top, Bottom, Left and
Right margins.
To Next Page
Loading...
