A-61660 July 2013 2-3
Installing the
Windows scanner
driver
1. Press the Power button to turn the scanner on.
The power indicator will flash orange then display a steady green
when the scanner is ready.
2. Turn on the host PC.
For Windows 2000, Windows XP or Windows Vista: You must be
logged in with Administrator privileges. Windows will detect the scanner
and start the Found New Hardware Wizard.
3. At the Found New Hardware Wizard screen, click Next.
4. Select Search for a suitable driver for my device, then click Next.
5. Select CD-ROM drives, then click Next.
6. Insert the Installation Resource CD into the appropriate drive on the
host PC.
7. When Windows finds the device driver, click Next.
NOTE: If Windows cannot find the driver files, click the Browse
button in the Files Needed dialog box. Browse to the folder
D:\minidriver, where “D” is the letter for the drive that
contains the Installation Resource CD. If there is no request
for files, continue with the next step.
If the Windows XP compatibility message is displayed, click
Continue Anyway.
8. The Found New Hardware Wizard will complete the driver
installation. Click Finish.
9. Restart the host PC.
To Next Page
Loading...
