Kodak Truper 3210 - Appendix B Installing and Using the Imprinter; Imprinter Components; Installing the Imprinter

A-61660 July 2013 B-1
Appendix B Installing and Using the Imprinter
Contents Imprinter components .....................................................................B-1
Installing the imprinter.....................................................................B-1
Ink cartridge installation and print position......................................B-3
Installing the ink cartridge............................................................B-3
Adjusting the print position ..........................................................B-4
Print position chart.......................................................................B-5
Cleaning the ink cartridge...............................................................B-6
Cleaning the print head automatically .........................................B-6
Cleaning the print head manually................................................B-6
Removing the ink cartridge .............................................................B-6
Ink cartridge specifications..............................................................B-7
Setting up the print string................................................................B-7
This appendix provides procedures for installing and using the optional
pre-scan imprinter and how to install and replace ink cartridges. For
information on ordering supplies and accessories, see the section
entitled, “Supplies and consumables” in Chapter 6, Maintenance.
Imprinter
components
Following are the components of the imprinter.
Installing the
imprinter
1. Turn the scanner off.
2. Open the imprinter door.
Connectors
Ink cartridge adjusting lever
Scale
Carriage