A-61660 July 2013 3-9
Scanning documents 1. Prepare the batch of documents you want to scan by following the
guidelines provided in the previous section, “Getting your
documents ready to scan”.
2. Place the documents you want to scan in the feeder tray with the
side to be scanned facing up. Slowly push the sheets into the
scanner transport.
NOTES:
• Do not overfill the feeder tray. The document stack should not
exceed the Paper Limit mark on the feeder tray.
• The guide on the ADF door provides a graphical document sizing
scale and a directional “Face Up” icon to aid in document
scanning.
• Use the Wire Frame attachment when scanning several
documents of varying sizes.
3. You are now ready to scan. Refer to the instructions for your
scanning application or document management software for more
information. Scanner settings are available through the Properties
window after the scanner has been selected. See Chapter 4,
Advanced Features for more information.
To Next Page
Loading...
