A-61660 July 2013 4-7
Paper Handling tab The Paper Handling tab provides the following options.
Feeding Features — check this option to set multi-feed detection.
Detect Double Feed: select this checkbox to turn Detect Double Feed
on. This function detects the feeding of more than one document at a
time. If a double feed is detected, you can stop scanning or be notified
that a double feed is detected and continue scanning.
This function can detect double feeds even when sheets are
superimposed exactly on top of each other, but it may not be detected
properly with some paper thicknesses and when creasing and other
factors are present.
If a double feed occurs, remove the document from the scanner and
separate the double-fed pages, reinsert the document(s) into the feeder
tray and press Stop/Start to resume scanning.
NOTE: For instructions on removing document jams, see the section
entitled, “Clearing a document jam” in Chapter 7.
• Sensitivity: if the Detect Double Feed function operates incorrectly,
adjust the sensitivity level by selecting one of the following levels:
- High — select this when feeding thin documents.
- Normal — this is the standard sensitivity.
- Low — select this when feeding thick documents.
To Next Page
Loading...
