4-6 A-61660 July 2013
Area — allows you to define the amount of image data which is
returned to your PC.
• X: the distance from the left end of the scanner to the left-edge of the
scanning area.
• Y: the position from the top end of the document to the top end of the
scanning area.
• Width: the width of the scanning area.
• Height: the height of the scanning area.
Select whether you want the area to be defined in Pixels, Inches or
Centimeters.
• Snap ⎯ enable this option to control the dimensions of the preview
area to fixed 1/8-inch increments.
Page Layout
• Portrait: displays the image orientation in the shape of a
conventional portrait, where height is greater than width.
• Landscape: displays the image orientation in the shape of a
conventional landscape painting, where width is greater than height.
Feed — allows you to select the way you place your documents in the
scanner, Top edge first, Bottom edge first, Left edge first or Right
edge first.
• Sub Area(W): this option is only available when Length Control in the
Paper Handling tab is disabled.
To Next Page
Loading...
