6-6 A-61660 July 2013
Cleaning the background
bars and imaging guides
1. Turn the scanner off.
2. Pull the exit door release lever to open the exit door.
3. In the scanner base assembly, clean the upper and lower imaging
guides and background bars with a Staticide wipe.
4. Gently close the exit door.
Cleaning the sensors Use the blower accessory to clean all sensors.
Cleaning the paper sensor, waiting sensors and double feed
detector
1. Press the ADF door release button to open the ADF door.
Upper and
lower
imaging
Upper and
lower
background
bars
guides
To Next Page
Loading...
