A-61660 July 2013 4-13
NOTES:
• The default values for Hue, Saturation and Value are typically
accurate. However, if the dropout color requires adjusting, the
Hue, Saturation and Value numbers can be modified manually.
• Hue determines the color. Saturation defines the intensity of the
color. Value controls the brightness of the color.
4. To add additional dropout colors, click the next Selection radio
button and repeat steps 4 - 7.
5. In the Maximum Replacement Value section, do one of the
following:
•Select Automatic and adjust the bar accordingly.
•Select Auto to completely dropout the color.
To disable dropout colors:
• Select the Selection radio button for the color you want to disable
and then uncheck Enable.
NOTE: Any and all of the selections can be active at the same time.
Gamma — this is a shading adjustment.
• Normal: uses a predefined curve that works best under most
conditions in all color modes.
• For CRT: select if you intend to view the images on a display.
• User Downloaded: to download your own curve formula.
• Linear: no curve, straight line formula.
To Next Page
Loading...
