5-2 A-61660 July 2013
Scanner Status and Error Code — displays the status of the
connected scanner along with error codes. For information about the
messages and error codes, see the section entitled, “User Utility error
codes” in Chapter 7.
Scanner Information — provides information about the connected
scanner (i.e., Model, Firmware Version, Memory installed, etc.).
Scanner Condition — provides information about scanner settings.
• Sleep Mode — the scanner is configured with the power saver
feature enabled with a 15-minute wait time. This conserves energy
and reduces operating costs. Sleep Mode will go into effect after 15
minutes after the last scanner operation. If you want to change these
values, click Sleep Mode and make your selection.
The wait time can be set from 1 to 60 minutes in 1-minute
increments.
• Clean Imprinter — if you have the imprinter installed, this option is
available. If the imprinter ink cartridge is clogged, verify that the
imprinter door is closed and click the Clean Imprinter button to clean
the cartridge. An automatic cleaning will be performed to improve the
print quality.
• Buzzer Setting — click ON if you want the scanner can alert you
with a buzzer when it detects a designated paper size.
To Next Page
Loading...
