B-8 A-61660 July 2013
The Imprinter Settings dialog box will be displayed.
2. Click Enable.
3. If you want bold type, click Bold Font.
4. In the Imprinter String field, type in the character string to be printed.
NOTE: The symbols and alphanumeric characters in the following
table can be printed. In addition, other information such as
the date and time can be specified. Up to 72 characters can
be printed.
5. Type in the printing offset in the Printing Offset field. A 10 mm offset
is always added to this value.
Unit: 2.38 mm per increment (printing orientation: 90, 270°)
1: 12.38 mm
2: 14.76 mm
Unit: 3.44 mm per increment (printing orientation: 00, 180°)
1: 13.44 mm
2: 16.88 mm
6. In the Start Number field, type in the default value of the counter
specified by the imprinter string.
7. In the Step Number field, type in the step number of the counter
specified by the imprinter string.
8. Select the printing orientation from the Orientation drop-down list.
9. If desired, check the Starting Number Automatic Increment
checkbox to automatically increment the number at the start of
scanning plus the number of pages scanned x the step number,
upon completion of scanning.
10.Click OK when finished.
To Next Page
Loading...
