English
10
ECO mode status
LED(s) Behavior Meaning / Possible cause(s)
No light Indicates that ECO mode 0 (ECO Off).
Lights up Indicates that ECO mode 1 is ON (Save 20% ink).
Lights up Indicates that ECO mode 2 is ON (Save 20% ink, page reduce 12%).
Network status
LED(s) Behavior Meaning / Possible cause(s)
Lights up The unit is connected to the Network using a Wireless connection.
Blinking 2
Indicates that the unit started to connect to the Network using a Wireless connection or WPS (Wi-Fi Protected
Setup) connection.
The unit is not connected to the Network yet.
Blinking 3
Indicates that the unit is in Easy Simple Print and there is no connection point.
Connection with Network equipment is not established yet.
No light
Indicates that Wireless connection is Off.
The unit is not connected to the Network.
Blinking 1
Indicates that the unit is directly connected to your smartphone/tablet using Easy Simple Print connection.
The unit is connected to the Network using Easy Simple Print.
Blinking 7
Indicates that the Network connection has become unavailable and the unit is not currently connected to the
Network.
Blinking 5
Indicates that the unit is in process of the Google Cloud Print™ registration.
Proceed to Google account registration and register this unit to your Google account.
Blinking 1 Indicates that the unit needs confirmation to start the Google Cloud Print™ registration.
Blinking 7
Indicates that the WPS connection failed.
The unit detected the Router, but failed to establish a connection.
Blinking 8
Indicates a session overlap error.
The session overlap error occurred because two Routers started the Wi-Fi Protection Setup simultaneously.
Blinking 1 (alternate
Yellow and Red)
Indicates that the unit received an identification request for AirPrint.
To Next Page
Loading...
