Kodak Verite 65 Plus - Changing Connection Type to Wi-Fi from USB Connection

English
19
Using USB Printer cable
• If you have connected between the unit and your PC by using the
USB cable (sold separately), this connection has priority.
• Once you double-clicked the printer driver installer, the printer driver
automatically starts to install to your PC without any guidance.
1 The following guidance will appear when the printer driver is
installed to your PC successfully.
• Click “Test print...” to make sure the printer driver installed
properly. (for Windows®)
Changing connection type to Wi-Fi from USB connection
USB has priority always.
If you would like to change the connection type to Wi-Fi from USB
connection, refer to the following instructions.
Microsoft® Windows®
1 Disconnect the USB cable between this unit and your PC first.
2 Click [Start].
3 Select [All apps] > [KODAK VERITE] > [Device Settings] > [Printer
re-search].
4 Change the connection type automatically.
Apple Mac OS
1 Follow step 1 of “
Install the printer driver to your PC
” for “Using
USB Printer cable” on page 19.
2 Disconnect the USB cable between this unit and your PC.
3 Activate [System Preferences].
4 Click [Printers & Scanners].
5 Click [+] > [Add printer or Scanner...].
6 Click the printer, select the driver from pull-down menu [Use], then
click [Add].
• Make sure to choose FUNAI KODAK VERITE 65 PLUS of
[Bonjour Multifunction] in [Kind].
7 Select [FUNAI KODAK VERITE 65 PLUS] added.
Continued on next page.