Kodak Verite 65 Plus - Restore Factory Default; Software Update

English
52
Restore Factory Default
All of the unit settings will be reset to the factory default.
1 From the Control panel, navigate to
[Home > Setup > Restore Factory Default],
then press
.
Setup
AirPrint
Google Cloud Print
Print Reports
Restore Factory Defau
Back Select
2 Press .
Restore Factory Default
Erase ALL content
and settings,
and restore
factory defaults?
Cancel Restore
3 Press .
• If you choose [Yes], all settings will be
restored to factory defaults and the unit
will restart.
If you choose [No], the display will return
to [Setup] screen.
Restore Factory Default
Are you sure you want
to restore to default?
Yes
No
Select
Software Update
•
Auto Update
Automatically checks for a newer software version and updates when
available.
1 If the latest software version is
automatically found on the server, the
message “New printer software detected.”
will be displayed. Press
.
Note(s)❏
• To cancel the update process, press
.
Cancel Next
Software Update
New printer software
detected.
2 “Do you want to update..” will be displayed.
Press
.
Back Update
Software Update
Do you want to update
the printer software?
Installed: *.**.***
Latest: *.**.***
3 Press .
Software Update
DO NOT unplug the
power cable or power-
off the printer until
update is completed.
4 Select [Yes], then press .
• If [No] is selected, the Software Update
will be aborted, and the display will
return to [Home].
• This unit will automatically restart upon
completion of the Software Update.
Select
Software Update
Are you sure you want
to update?
Yes
No
Continued on next page.