English
41
Scan in Mac
Run the Image Capture application. (Scanning with other applications
such as “Preview” is a very similar process.)
•
Simplified scan mode
In the “Simplified” scanner interface, follow these Steps:
1 Place the document you would like to scan on the scanner glass.
2 Open Image Capture located in the Applications folder.
3 Select this unit from list of devices.
4 Select the desired destination where the scanned document is
to be saved from the [Scan To] pop-up menu.
5 Click [Scan] to scan.
6 A preview will appear on your monitor when scanning is
completed.
•
Advanced scanning options
In the “simplified” scanner interface, click [Show Details] if you want
to enter a detailed scan mode with more advanced options.
Kind:
Select the scan color depth from below:
• Color • Black & White • Text
– Choose “Color” to scan an object in Color.
– Choose “Black & White” to scan an object in Grayscale (256 or
Thousands of grays).
– Choose “Text” to scan text documents.
Resolution:
Select the scan Resolution from below:
• 75 dpi
• 100 dpi
• 150 dpi
• 200 dpi
• 300 dpi
• 600 dpi
• 1200 dpi
– Select the [Use Custom Size] checkbox to enable the [Size]
fields to specify the width and height you want to scan. Select
pixels, inches or cm (centimeters).
Rotation Angle:
Set the number of degrees for the clockwise rotation of your scanned
image.
Auto Selection:
Choose one of the following from the [Auto selection] pop-up menu.
[Off] – to normally select the object.
[Detect Separate Items] – to automatically select and
straighten the objects you are
scanning.
[Detect Enclosing Box] – to include all the items on the
scanner bed in one image.
Scan To:
Select the desired destination where the scanned document is to be
saved.
Continued on next page.
To Next Page
Loading...
